Lexus ES: Lexus Enform System (for Hv Model)
Lexus ES (XZ10) Service Manual / Audio & Visual & Telematics / Cellular Communication / Lexus Enform System (for Hv Model)
- Confirm Cellular Phone Functionality
- Confirm Vehicle Headunit Functionality
- DCM Data Signal Circuit between Navigation ECU and DCM
- Does not Recognize Voice Commands Performed to Contact Support Center
- How To Proceed With Troubleshooting
- Operation Check
- Parts Location
- Precaution
- Problem Symptoms Table
- System Description
- System Diagram
- Terminals Of Ecu
READ NEXT:
Confirm Cellular Phone Functionality
PROCEDURE 1. CHECK CUSTOMER'S CELLULAR PHONE COMPATIBILITY (a) Check if the cellular phone is compatible (Refer to http://www.lexus.com/MobileLink/). Result Proceed to Cellular phone
Confirm Vehicle Headunit Functionality
PROCEDURE 1. CHECK CUSTOMER'S CELLULAR PHONE COMPATIBILITY (a) Check if the cellular phone is compatible (Refer to http://www.lexus.com/MobileLink/). Result Proceed to Cellular phone
DCM Data Signal Circuit between Navigation ECU and DCM
DESCRIPTION This circuit is used to send and receive signals between the DCM (Telematics Transceiver), radio receiver assembly and navigation ECU. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND
SEE MORE:
Blind Spot Monitor Beam Axis Misalignment (C1AFA)
DESCRIPTION This DTC is stored when the clearance warning ECU assembly receives a signal from the blind spot monitor system via CAN communication indicating blind spot monitor beam axis misalignment. DTC No. Detection Item DTC Detection Condition Trouble Area C1AFA Blind Spot Monitor
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during clearance warning ECU assembly removal/installation are shown below. Necessary Procedure After Parts Re
© 2016-2025 Copyright www.lexguide.net
