Lexus ES manuals

Lexus ES: Software Incompatibility with Body Control Module Invalid/Incompatible Software Component (U032257)

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Dynamic Radar Cruise Control System (for Hv Model) / Software Incompatibility with Body Control Module Invalid/Incompatible Software Component (U032257)

DESCRIPTION

If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the main body ECU (multiplex network body ECU), the forward recognition camera stores DTC U032257.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

DTC Output from

U032257

Software Incompatibility with Body Control Module Invalid/Incompatible Software Component

The vehicle information sent from the main body ECU (multiplex network body ECU) does not match that stored in the forward recognition camera.

Front camera system

Does not come on

Radar Cruise2

PROCEDURE

1.

GO TO FRONT CAMERA SYSTEM

HINT:

If DTC U032257 is output by the dynamic radar cruise control system, perform troubleshooting for the front camera system.

Click here

NEXT

END

READ NEXT:

 Invalid Data Received from Hybrid Powertrain Control Module Invalid Serial Data Received (U059481)

DESCRIPTION If the hybrid vehicle control ECU cannot recognize the forward recognition camera. DTC U059481 is stored. DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC O

 Steering Pad Switch Circuit

DESCRIPTION The steering pad switch assembly outputs the dynamic cruise control on/off signal and various control signals to the hybrid vehicle control ECU. The hybrid vehicle control ECU control

 Distance Control Switch Circuit

DESCRIPTION The vehicle-to-vehicle distance control switch is used to set the distance for vehicle-to-vehicle distance control mode. The vehicle-to-vehicle distance control switch is installed in the

SEE MORE:

 Relay

On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT HORN RELAY *a Component without harness connected (HORN Relay) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 A

 Lost Communication with Alternator Missing Message (P161A87)

DESCRIPTION The ECM communicates with the generator assembly via LIN communication. If a LIN communication error is detected, the ECM stores this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory Note P161A87 Lost Communication with Alterna

© 2016-2024 Copyright www.lexguide.net