Lexus ES: Cruise Control
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control
- Camera Heater
- Dynamic Radar Cruise Control System (for Gasoline Model)
- Dynamic Radar Cruise Control System (for Hv Model)
- Front Camera
- Front Camera System (for Gasoline Model)
- Front Camera System (for Hv Model)
- Front Radar Sensor System (for Gasoline Model)
- Front Radar Sensor System (for Hv Model)
- Lane Control System (for Gasoline Model)
- Lane Control System (for Hv Model)
- Millimeter Wave Radar Sensor
- Road Sign Assist System (for Gasoline Model)
- Road Sign Assist System (for Hv Model)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FORWARD RECOGNITION CAMERA *2 FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
Removal
REMOVAL PROCEDURE 1. REMOVE FORWARD RECOGNITION CAMERA Click here 2. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY NOTICE:
Do not touch the inner surface of the forward recognition wi
SEE MORE:
Software Incompatibility with Brake System Control Module Not Programmed (U031851)
DESCRIPTION If the forward recognition camera cannot verify the vehicle information sent from the skid control ECU (brake actuator assembly), the forward recognition camera stores DTC U031851. DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from U031851
Installation
INSTALLATION PROCEDURE 1. INSTALL CHECK VALVE GROMMET (a) Install a new check valve grommet to the brake booster assembly. 2. INSTALL VACUUM WARNING SWITCH ASSEMBLY (a) Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration. *a 30° +/- 20°
© 2016-2025 Copyright www.lexguide.net
