Lexus ES: Precaution

Lexus ES (XZ10) Service Manual / Vehicle Interior / Door / Hatch / Power Trunk Lid System (for Hv Model) / Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.

System Name	See Procedure
Lane Control System (for HV Model)
Parking Support Brake System (for HV Model)
Parking Assist Monitor System (for HV Model)
Panoramic View Monitor System (for HV Model)
Pre-collision System (for HV Model)
Power Trunk Lid System (for HV Model)
Lighting System (for HV Model)

PRECAUTIONS FOR HANDS FREE POWER TRUNK LID

(a) In the following situations, the hands free power trunk lid may operate unintentionally if the electrical key transmitter sub-assembly is near or within the rear door exterior operation detection area:

HINT:

Refer to the "Smart Access System (for Entry Function)" section for the operation detection area.

Click here

When a large amount of water is applied to the rear bumper, such as when in heavy rain.
When water is applied to the rear bumper, such as when washing the vehicle.
When dirt, etc. is wiped off the rear bumper.
When a small animal or ball suddenly enters the area below the rear bumper.
When trying to remove an object from below the rear bumper.
When removing snow, etc. from below the rear bumper. (such as when using a snow shovel)
When a person sits on the rear bumper and moves their legs.
When a person's leg or body brushes against the rear bumper while passing the vehicle.
When parked in an area where radio waves or noise interferes with the sensitivity of the kick door sensor, such as coin parking, gasoline stands, when driving on roads with road heating or passing fluorescent lights.
There are TV towers, electric power plants, broadcasting stations, gas stations or other facilities that generate strong radio waves or electrical noise nearby.
When parked near plants, etc., near the rear bumper.
When loading or unloading objects near the rear bumper.
When removing or installing accessories or a car cover near the rear bumper.
When the vehicle is being towed.

(b) In the following situations, the hands free power trunk lid may not operate normally:

When the rear bumper is strongly kicked.
When there are electrical waves present that interfere with communication between the electrical key transmitter sub-assembly and vehicle.
When a device which emits radio waves which are near the same frequency as the kick door control sensor is near the vehicle.
When parked in an area where radio waves or noise interferes with the sensitivity of the kick door sensor, such as coin parking, gasoline stands, when driving on roads with road heating or passing fluorescent lights.
When a large amount of water is applied to the rear bumper, such as when in heavy rain.
When water is applied to the rear bumper, such as when washing the vehicle.
When mud, snow, ice, etc. is attached to the rear bumper.
When the vehicle has been parked for a while near objects that move and contact the rear bumper, such as tall grass or trees.
When parking in an area with an electric field, such as road heating.
When accessories, etc. are attached to the rear bumper.
When the remote engine starter is operating.
When kick operations are performed several times consecutively.
When the rear bumper is touched for a certain period of time.
There are TV towers, electric power plants, broadcasting stations, gas stations or other facilities that generate strong radio waves or electrical noise nearby.

When not carrying the electrical key transmitter sub-assembly.
When the customization setting is not set as follows:
- The "KICK SENSOR" item is set to "On" using the customization function via the multi-information display in the combination meter assembly (The default setting is "On").
  Click here
- The "PBD Power Operation" item is set to "ON" using the Techstream customization function (The default setting is "ON").
  Click here
- The "Kick Sensor Function" item is set to "ON" using the Techstream customization function. (The default setting is "ON")
  Click here
When the electrical key transmitter sub-assembly is outside of the power trunk lid operation detection area.
When the entry function does not operate because of wave interference.

SEE MORE:

Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range (P01102A)

DESCRIPTION Refer to DTC P011011. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P01102A Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range Either of the following conditions is met (2 trip detection logic): The intake air

Tire Pressure Monitor ECU Communication Stop (C2179)

DESCRIPTION The main body ECU (multiplex network body ECU) sends signals to the tire pressure warning ECU and receiver via a direct line. DTC No. Detection Item DTC Detection Condition Trouble Area Note C2179 Tire Pressure Monitor ECU Communication Stop Communication between the m

Lexus ES: Precaution

READ NEXT:

Parts Location

System Diagram

How To Proceed With Troubleshooting

SEE MORE:

Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range (P01102A)

Tire Pressure Monitor ECU Communication Stop (C2179)