Lexus ES: Lost Communication With Body Control Module "B" (U0142)
DESCRIPTION
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
U0142 | Lost Communication with Main Body ECU | No communication with main body ECU (multiplex network body ECU) | -
CAN communication system
-
Main body ECU (multiplex network body ECU)
|
PROCEDURE
1. | GO TO CAN COMMUNICATION SYSTEM |
HINT:
Refer to CAN Communication System.
Click here
NEXT | | END |
READ NEXT:
DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the rec
DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the rec
DESCRIPTION The outer mirror switch assembly sends the mirror adjust switch signals to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the rec
SEE MORE:
TERMINALS OF ECU CHECK SWING GRILLE ACTUATOR ASSEMBLY (a) Disconnect the z23 swing grille actuator assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. Tester Co
REPLACEMENT PROCEDURE 1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH Click here 2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH Click here 3. REMOVE NO. 1 ENGINE UNDER COVER Click here 4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY Click here 5. DRAIN TRANSFER OIL Click here 6. ADD TRANSFE
© 2016-2024 Copyright www.lexguide.net