Lexus ES: Hybrid/EV Powertrain Control Module Processor Watchdog / Safety MCU Failure (P060647,...,P1CE371)
DESCRIPTION
The hybrid vehicle control ECU monitors its internal operation and will store these DTCs when it detects an internal malfunction. If these DTCs are output, replace the hybrid vehicle control ECU.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P060647 | Hybrid/EV Powertrain Control Module Processor Watchdog / Safety MCU Failure | ECU internal malfunction (HV-CPU error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060687 | Hybrid/EV Powertrain Control Module Processor to Monitoring Processor Missing Message | ECU internal malfunction (Communication error (main to sub CPU)) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060A29 | Hybrid/EV Powertrain Control Module Monitoring Processor Signal Invalid | ECU internal malfunction (Sub CPU circuit error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060A44 | Hybrid/EV Powertrain Control Module Monitoring Processor Data Memory Failure | ECU internal malfunction (Sub CPU RAM error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060A45 | Hybrid/EV Powertrain Control Module Monitoring Processor Program Memory Failure | ECU internal malfunction (Sub CPU ROM error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060A47 | Hybrid/EV Powertrain Control Module Monitoring Processor Watchdog / Safety MCU Failure | ECU internal malfunction (Sub CPU WDC error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060A49 | Hybrid/EV Powertrain Control Module Monitoring Processor Internal Electronic Failure | ECU internal malfunction (Sub CPU calculation check error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060A87 | Hybrid/EV Powertrain Control Module Processor from Monitoring Processor Missing Message | ECU internal malfunction (Communication error (sub to main CPU)) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060B1C | Hybrid/EV Powertrain Control Module A/D Processing Voltage Out of Range | ECU internal malfunction (AD conversion error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060B49 | Hybrid/EV Powertrain Control Module A/D Processing Internal Electronic Failure | ECU internal malfunction (AD timeout error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P060B71 | Hybrid/EV Powertrain Control Module A/D Processing Actuator Stuck | ECU internal malfunction (AD multiplexer error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P1C9E9F | Hybrid/EV System Reset Stuck Off | ECU internal malfunction (Primary check error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P1CE31C | Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Voltage Out of Range | ECU internal malfunction (Sub CPU AD conversion error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P1CE349 | Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Internal Electronic Failure | ECU internal malfunction (Sub CPU AD timeout error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
| P1CE371 | Hybrid/EV Powertrain Control Module Monitoring Processor A/D Processing Actuator Stuck | ECU internal malfunction (Sub CPU AD multiplexer error) (1 trip detection logic) | Hybrid vehicle control ECU | Comes on | Master Warning Light: Comes on |
MONITOR DESCRIPTION
The hybrid vehicle control ECU performs diagnostic tests to verify proper operation of internal ECU systems. If there is an internal ECU malfunction, the hybrid vehicle control ECU will illuminate the MIL and store a DTC.
MONITOR STRATEGY
| Related DTCs | P0606 (INF P060647): Control module processor performance P0606 (INF P060687): Control module processor verify communication P060A (INF P060A29/P060A44/P060A45/P060A47/P060A49): Internal control module monitoring processor performance P060A (INF P060A87): Internal control module monitoring processor verify communication P060B (INF P060B1C/P060B49/P060B71): Internal control module A/D processing performance P1C9E (INF P1C9E9F): Control module processor restart P1CE3 (INF P1CE31C/P1CE349/P1CE371): Internal control module monitoring processor A/D processing performance |
| Required sensors/components | Hybrid vehicle control ECU |
| Frequency of operation | Continuous |
| Duration | TMC's intellectual property |
| MIL operation | Immediately / 1 driving cycle |
| Sequence of operation | None |
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not stored | TMC's intellectual property |
| Other conditions belong to TMC's intellectual property | - |
TYPICAL MALFUNCTION THRESHOLDS
| TMC's intellectual property | - |
COMPONENT OPERATING RANGE
| Hybrid vehicle control ECU | DTC P0606 (INF P060647/P060687) is not detected DTC P060A (INF P060A29/P060A44/P060A45/P060A47/P060A49/P060A87) is not detected DTC P060B (INF P060B1C/P060B49/P060B71) is not detected DTC P1C9E (INF P1C9E9F) is not detected DTC P1CE3 (INF P1CE31C/P1CE349/P1CE371) is not detected |
CONFIRMATION DRIVING PATTERN
HINT:
-
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
.gif)
-
When clearing the permanent DTCs, refer to the "CLEAR PERMANENT DTC" procedure.
Click here
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG) and turn the Techstream on.
- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
- Turn the power switch off and wait for 2 minutes or more.
- Turn the power switch on (IG) and turn the Techstream on.
-
With power switch on (IG) and wait for 15 seconds or more. [*1]
HINT:
[*1] : Normal judgment procedure.
The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.
- Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
- If the judgment result shows NORMAL, the system is normal.
- If the judgment result shows ABNORMAL, the system has a malfunction.
- If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.
PROCEDURE
| 1. | REPLACE HYBRID VEHICLE CONTROL ECU |
Click here
| NEXT | .gif) | END |
READ NEXT:
Hybrid/EV Powertrain Control Module Processor Unexpected Operation (P060694)
DTC SUMMARY MALFUNCTION DESCRIPTION The main CPU and sub CPU of the Hybrid vehicle control ECU monitor each other. The cause of this malfunction may be the following: Hybrid vehicle control ECU inter
Hybrid/EV Powertrain Control Module Monitoring Processor Unexpected Operation (P060A94)
DTC SUMMARY MALFUNCTION DESCRIPTION The main CPU and sub CPU of the hybrid vehicle control ECU monitor their internal operation and each other for malfunctions. The cause of this malfunction may be th
Hybrid/EV Powertrain Control Module EEPROM Data Memory Failure (P062F44)
DESCRIPTION The hybrid vehicle control ECU monitors its internal operation and will store these DTCs when it detects an internal malfunction. If these DTCs are output, replace the hybrid vehicle contr
SEE MORE:
Vehicle Control History
VEHICLE CONTROL HISTORY NOTICE: Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again. CHECK VEHICLE CONTROL HISTORY NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initia
Display does not Dim when Light Control Switch is Turned ON
DESCRIPTION When the audio and visual system is activated with the light control switch in the tail or head position, before AVC-LAN communication is established, the multi-display assembly dims the display according to the illumination signal received via a direct line. After AVC-LAN communication
