Lexus ES: For safety and security
READ NEXT:
Observe the following before starting
off in the vehicle to ensure
safety of driving.
Installing floor mats
Use only floor mats designed specifically
for vehicles of the same model
and model yea
For safe driving, adjust the seat and
mirror to an appropriate position
before driving.
Correct driving posture
Adjust the angle of the seatback so
that you are sitting straight up and
so
SEE MORE:
DESCRIPTION This procedure is for troubleshooting when the slip indicator light remains on but no DTCs are output. The skid control ECU (brake actuator assembly) controls the slip indicator light in the combination meter assembly via CAN communication. The slip indicator light blinks during VSC and/
INSPECTION PROCEDURE 1. INSPECT OIL PRESSURE CONTROL VALVE ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 6.2 to 8.2 Ω If the result is not as specified,
© 2016-2024 Copyright www.lexguide.net