Lexus ES: Vehicle Control History
Lexus ES (XZ10) Service Manual / Drivetrain / Ua80e (automatic Transmission / Transaxle) / Automatic Transaxle System / Vehicle Control History
VEHICLE CONTROL HISTORY
VEHICLE CONTROL HISTORY
HINT:
A part of the control history can be confirmed using the vehicle control history.
Click here .gif)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 NO. 1 OIL COOLER OUTLET TUBE SUB-ASSEMBLY *2 NO. 1 TRANSMISSION OIL FILLER TUBE *3 OIL COOLER UNION SUB-ASSEMBLY *4 OVERFLOW PLUG *5 PARK/NEUTRAL P
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE TRANSMISSION CONTROL SHAFT LEVER (a) Remove the nut, washer and transmission control shaft lever from the manual valve lever shaft sub-assembly. 2. REMOV
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 HV SUPPLY STACK SUB-ASSEMBLY CAUTION: Be sure to wear insulated gloves and protective goggles. (a) Install the No. 2 HV supply stack sub-assembly with the 4 nuts. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} (b) Engage the claw. (c) Engage the clamp. (d) Install
CD cannot be Inserted / Played or CD is Ejected Right After Insertion
CAUTION / NOTICE / HINT NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
When replacing the radio receiver assembly, alw
© 2016-2025 Copyright www.lexguide.net
