Lexus ES: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- The Matrix Chart is divided into 2 chapters. When troubleshooting, check Chapter 1 first. If instructions are given in Chapter 1 to proceed to 2, proceed as instructed.
- If the instruction "Proceed to Next Suspected Area Shown in Problem Symptoms Table" is given in the flowchart for each circuit, proceed to the next suspected area in the table.
- If the problem still occurs even though there are no malfunctions in any of the circuits, check the ECM and replace it if necessary.
- *: When there is a malfunction in this circuit, a DTC may be stored.
| Symptom | Suspected Area | Link |
|---|---|---|
| No up-shift (1st to 2nd) | Solenoid (SL5) valve circuit* | |
| Solenoid (SL6) valve circuit* | | |
| ECM | | |
| No up-shift (2nd to 3rd) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL5) valve circuit* | | |
| ECM | | |
| No up-shift (3rd to 4th) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No up-shift (4th to 5th) | Solenoid (SL2) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No up-shift (5th to 6th) | Solenoid (SL1) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No up-shift (6th to 7th) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No up-shift (7th to 8th) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL5) valve circuit* | | |
| ECM | | |
| No down-shift (8th to 7th) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL5) valve circuit* | | |
| ECM | | |
| No down-shift (7th to 6th) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No down-shift (6th to 5th) | Solenoid (SL1) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No down-shift (5th to 4th) | Solenoid (SL2) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No down-shift (4th to 3rd) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL4) valve circuit* | | |
| ECM | | |
| No down-shift (3rd to 2nd) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL5) valve circuit* | | |
| ECM | | |
| No down-shift (2nd to 1st) | Solenoid (SL5) valve circuit* | |
| Solenoid (SL6) valve circuit* | | |
| ECM | | |
| No lock-up or no lock-up off | Solenoid (SLU) valve circuit* | |
| Solenoid (SL) valve circuit* | | |
| Transmission revolution sensor (NT) circuit* | | |
| Stop light switch circuit* | | |
| ECM | | |
| No lock-up | Solenoid (SLU) valve circuit* | |
| Solenoid (SL) valve circuit* | | |
| Transmission revolution sensor (NT) circuit* | | |
| Stop light switch circuit* | | |
| Engine coolant temperature sensor circuit* | | |
| ECM | | |
| No lock-up off | Solenoid (SLU) valve circuit* | |
| Solenoid (SL) valve circuit* | | |
| ECM | | |
| Shift point too high or too low | Solenoid (SLT) valve circuit* | |
| Transmission revolution sensor (NT) circuit* | | |
| Transmission revolution sensor (NC) circuit* | | |
| ATF temperature sensor circuit* | | |
| Throttle position sensor circuit* | | |
| ECM | | |
| No gear change by moving shift lever to "+" or "-" while in S | Transmission control switch circuit | |
| ECM | | |
| No gear change by operating the "+" or "-" paddle switch | Shift paddle switch circuit | |
| ECM | | |
| No change by drive mode switch | Drive mode select switch circuit | |
| Harsh engagement (N to D) | Solenoid (SL1) valve circuit* | |
| Solenoid (SL6) valve circuit* | | |
| Solenoid (SLT) valve circuit* | | |
| Transmission revolution sensor (NT) circuit* | | |
| ECM | | |
| Harsh engagement (N to R) | Solenoid (SL3) valve circuit* | |
| Solenoid (SL6) valve circuit* | | |
| Solenoid (SLT) valve circuit* | | |
| Transmission revolution sensor (NT) circuit* | | |
| ECM | | |
| Harsh engagement (lock-up) | Solenoid (SLU) valve circuit* | |
| Transmission revolution sensor (NT) circuit* | | |
| Transmission revolution sensor (NC) circuit* | | |
| ECM | | |
| Harsh engagement (any driving position) | Accelerator pedal position sensor circuit* | |
| Solenoid (SLT) valve circuit* | | |
| Transmission revolution sensor (NT) circuit* | | |
| Transmission revolution sensor (NC) circuit* | | |
| ATF temperature sensor circuit* | | |
| ECM | | |
| Poor acceleration | Solenoid (SLT) valve circuit* | |
| ECM | | |
| No engine braking | ECM | |
| No kick-down | ECM | |
| Engine stalls when starting off or stopping. | Solenoid (SLU) valve circuit* | |
| Solenoid (SL) valve circuit* | | |
| ECM | | |
| Shifting malfunction | Park/neutral position switch circuit* | |
| Transmission control switch circuit | | |
| Shift paddle switch circuit | | |
| ECM | |
.gif)
| Symptom | Suspected Area | Link |
|---|---|---|
| Vehicle does not move with shift lever in any forward position or reverse position | Transmission control cable | |
| Manual valve | | |
| Parking lock pawl | | |
| Rear planetary ring gear assembly | | |
| Torque converter assembly | | |
| Vehicle does not move with shift lever in R | Transmission valve body assembly | |
| No. 3 clutch (C3) | | |
| No. 2 brake (B2) | | |
| No up-shift (1st to 2nd) | Transmission valve body assembly | |
| Solenoid (SL5) valve | | |
| Solenoid (SL6) valve | | |
| No. 1 brake (B1) | | |
| No up-shift (2nd to 3rd) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL5) valve | | |
| No. 3 clutch (C3) | | |
| No up-shift (3rd to 4th) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL4) valve | | |
| No. 4 clutch (C4) | | |
| No up-shift (4th to 5th) | Transmission valve body assembly | |
| Solenoid (SL2) valve | | |
| Solenoid (SL4) valve | | |
| No. 2 clutch (C2) | | |
| No up-shift (5th to 6th) | Transmission valve body assembly | |
| Solenoid (SL1) valve | | |
| Solenoid (SL4) valve | | |
| No. 4 clutch (C4) | | |
| No up-shift (6th to 7th) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL4) valve | | |
| No. 3 clutch (C3) | | |
| No up-shift (7th to 8th) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL5) valve | | |
| No. 1 brake (B1) | | |
| No down-shift (8th to 7th) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL5) valve | | |
| No. 3 clutch (C3) | | |
| No down-shift (7th to 6th) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL4) valve | | |
| No. 4 clutch (C4) | | |
| No down-shift (6th to 5th) | Transmission valve body assembly | |
| Solenoid (SL1) valve | | |
| Solenoid (SL4) valve | | |
| No. 1 clutch (C1) | | |
| No down-shift (5th to 4th) | Transmission valve body assembly | |
| Solenoid (SL2) valve | | |
| Solenoid (SL4) valve | | |
| No. 4 clutch (C4) | | |
| No down-shift (4th to 3rd) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL4) valve | | |
| No. 3 clutch (C3) | | |
| No down-shift (3rd to 2nd) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL5) valve | | |
| No. 1 brake (B1) | | |
| No down-shift (2nd to 1st) | Transmission valve body assembly | |
| Solenoid (SL5) valve | | |
| Solenoid (SL6) valve | | |
| No. 2 brake (B2) | | |
| No lock-up or no lock-up off | Transmission valve body assembly | |
| Torque converter assembly | | |
| Lock-up is early and shift points are lower than normal | Vehicle driven harshly | - |
| Flow shutting valve | | |
| Harsh engagement (N to D) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 2 brake (B2) | | |
| Solenoid (SL1) valve | | |
| Solenoid (SL6) valve | | |
| Harsh engagement (N to R) | Transmission valve body assembly | |
| Solenoid (SL3) valve | | |
| Solenoid (SL6) valve | | |
| No. 3 clutch (C3) | | |
| No. 2 brake (B2) | | |
| Harsh engagement (lock-up) | Transmission valve body assembly | |
| Torque converter assembly | | |
| Harsh engagement (1st to 2nd to 3rd to 4th to 5th to 6th to 7th to 8th) | Transmission valve body assembly | |
| Harsh engagement (1st to 2nd) | Transmission valve body assembly | |
| No. 1 brake (B1) | | |
| No. 2 brake (B2) | | |
| Harsh engagement (2nd to 3rd) | Transmission valve body assembly | |
| No. 1 brake (B1) | | |
| No. 3 clutch (C3) | | |
| Harsh engagement (3rd to 4th) | Transmission valve body assembly | |
| No. 3 clutch (C3) | | |
| No. 4 clutch (C4) | | |
| Harsh engagement (4th to 5th) | Transmission valve body assembly | |
| No. 2 clutch (C2) | | |
| No. 4 clutch (C4) | | |
| Harsh engagement (5th to 6th) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 4 clutch (C4) | | |
| Harsh engagement (6th to 7th) | Transmission valve body assembly | |
| No. 3 clutch (C3) | | |
| No. 4 clutch (C4) | | |
| Harsh engagement (7th to 8th) | Transmission valve body assembly | |
| No. 1 brake (B1) | | |
| No. 3 clutch (C3) | | |
| Slip or shudder (shift lever in R) | No. 3 clutch (C3) | |
| No. 2 brake (B2) | | |
| Torque converter assembly | | |
| Slip or shudder (1st) | No. 1 clutch (C1) | |
| No. 2 brake (B2) | | |
| Torque converter assembly | | |
| Slip or shudder (2nd) | No. 1 clutch (C1) | |
| No. 1 brake (B1) | | |
| Torque converter assembly | | |
| Slip or shudder (3rd) | No. 1 clutch (C1) | |
| No. 3 clutch (C3) | | |
| Torque converter assembly | | |
| Slip or shudder (4th) | No. 1 clutch (C1) | |
| No. 4 clutch (C4) | | |
| Torque converter assembly | | |
| Slip or shudder (5th) | No. 1 clutch (C1) | |
| No. 2 clutch (C2) | | |
| Torque converter assembly | | |
| Slip or shudder (6th) | No. 2 clutch (C2) | |
| No. 4 clutch (C4) | | |
| Torque converter assembly | | |
| Slip or shudder (7th) | No. 2 clutch (C2) | |
| No. 3 clutch (C3) | | |
| Torque converter assembly | | |
| Slip or shudder (8th) | No. 2 clutch (C2) | |
| No. 1 brake (B1) | | |
| Torque converter assembly | | |
| No engine braking (1st) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 2 brake (B2) | | |
| No engine braking (2nd) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 1 brake (B1) | | |
| No engine braking (3rd) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 3 clutch (C3) | | |
| No engine braking (4th) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 4 clutch (C4) | | |
| No engine braking (5th) | Transmission valve body assembly | |
| No. 1 clutch (C1) | | |
| No. 2 clutch (C2) | | |
| No engine braking (6th) | Transmission valve body assembly | |
| No. 2 clutch (C2) | | |
| No. 4 clutch (C4) | | |
| No kick-down | Transmission valve body assembly | |
| Shift point too high or too low | Transmission valve body assembly | |
| Poor acceleration (all positions) | Transmission valve body assembly | |
| Torque converter assembly | | |
| Engine stalls when starting off or stopping. | Transmission valve body assembly | |
| Torque converter assembly | |
READ NEXT:
Registration
REGISTRATION CAUTION / NOTICE / HINT NOTICE:
When the automatic transaxle assembly is replaced, the transaxle compensation code must be registered to the ECM (proceed to Procedure 1).
After the aut
Road Test
ROAD TEST PROBLEM SYMPTOM CONFIRMATION (a) Based on the result of the customer problem analysis, try to reproduce the symptoms. If the problem is that the transaxle does not shift up, shift down, or t
Shift Paddle Switch Circuit
DESCRIPTION Moving the shift lever to S enables the shift range to be selected. The shift range can be selected by operating the "+" or "-" shift paddle switch. WIRING DIAGRAM CAUTION / NOTICE / HINT
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE: Do not cross-thread the bolts when installing them. PROCEDURE 1. HOW TO PREVENT STATIC ELECTRICITY SST: 09890-47010 NOTICE:
Static electricity should be eliminated when removing/installing the inverter with converter assembly.
Do not touch the electr
Components
COMPONENTS ILLUSTRATION *A for EGR Valve Bracket Connection Type *B for Cylinder Head Cover Sub-assembly Connection Type *1 FUEL PUMP ASSEMBLY *2 NO. 1 FUEL PIPE SUB-ASSEMBLY *3 FUEL TUBE SUB-ASSEMBLY *4 FUEL PUMP LIFTER ASSEMBLY *5 FUEL PUMP FLANGE *6 FUEL PU
