Lexus ES: Lost Communication with TCM (U0101,U0122,U0142,U0155,U0327,U1117)
DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0101 | Lost Communication with TCM | Communication malfunction detected between luggage closer motor assembly and ECM |
|
| U0122 | Lost Communication With Vehicle Dynamics Control Module | Communication malfunction detected between luggage closer motor assembly and brake booster with master cylinder assembly (skid control ECU) |
|
| U0142 | Lost Communication With Body Control Module "B" | Communication malfunction detected between luggage closer motor assembly and main body ECU (multiplex network body ECU) |
|
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | Communication malfunction detected between luggage closer motor assembly and combination meter assembly |
|
| U0327 | Lost Communication with Vehicle Security Control Module | Communication malfunction detected between luggage closer motor assembly and certification ECU (smart key ECU assembly) |
|
| U1117 | Lost Communication with Accessory Gateway | Communication malfunction detected between luggage closer motor assembly and bus buffer ECU |
|
PROCEDURE
| 1. | CHECK FOR DTC |
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Back Door / Trouble Codes.
(e) Clear the DTCs.
Body Electrical > Back Door > Clear DTCs(f) Check for DTCs.
Body Electrical > Back Door > Trouble CodesHINT:
If DTCs related to a malfunction in the CAN communication system are output, refer to "How to Proceed with Troubleshooting" for the CAN communication system.
Click here .gif)
OK:
DTC U0101, U0122, U0142, U0155, U0327 and U1117 is not output.
| OK | .gif) | USE SIMULATION METHOD TO CHECK |
| NG | | GO TO CAN COMMUNICATION SYSTEM |
READ NEXT:
Luggage Compartment Door Closer does not Operate
DESCRIPTION The luggage compartment door closer operation controls the luggage door closer assembly via the luggage closer motor assembly based on switch signals in the luggage door closer assembly. W
Power Trunk Lid does not Operate Using Any Switches
DESCRIPTION The power trunk lid controls the luggage closer motor assembly and operates the luggage closer motor assembly and luggage door closer assembly. If the power trunk lid does not operate usin
Power Trunk Lid does not Operate Using Cabin Switch
DESCRIPTION The trunk and fuel switch assembly (luggage compartment door opening switch) signal is sent to the luggage closer motor assembly. If the power trunk lid does not operate using the trunk an
SEE MORE:
Mass or Volume Air Flow Sensor "A" Signal Plausibility Failure (P010064)
DESCRIPTION Refer to DTC P010012. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P010064 Mass or Volume Air Flow Sensor "A" Signal Plausibility Failure All of the following conditions are met (2 trip detection logic).
The engine is
Motor Electronics Coolant Temperature Sensor Circuit Short to Ground (P0A0011,P0A0015)
DESCRIPTION Refer to the description for DTC P0A001C. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P0A0011 Motor Electronics Coolant Temperature Sensor Circuit Short to Ground Short to ground detected in HV coolant temperature sen
