Lexus ES: Lost Communication with ECM/PCM "A" Missing Message (U010087,...,U117587)
DESCRIPTION
The hybrid vehicle control ECU transmits and receives signals via CAN communication to and from the ECM, yaw rate sensor, skid control ECU assembly, power steering ECU assembly, main body ECU, airbag ECU assembly, and air conditioning amplifier assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | A CAN communication error between the ECM and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Comes on | Master Warning Light: Comes on |
| U010487 | Lost Communication with Cruise Control Module Missing Message | A CAN communication error between the driving support ECU and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Does not come on |
| U011087 | Lost Communication with Drive Motor Control Module "A" Missing Message | A CAN communication error between the MG ECU and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Comes on | Master Warning Light: Comes on |
| U012287 | Lost Communication with Vehicle Dynamics Control Module Missing Message | A CAN communication error between the skid control ECU assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Does not come on |
| U012987 | Lost Communication with Brake System Control Module Missing Message | A CAN communication error (V BUS) between the skid control ECU assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Comes on | Master Warning Light: Comes on |
| U014087 | Lost Communication with Body Control Module Missing Message | A CAN communication error between the main body ECU and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Comes on |
| U015187 | Lost Communication with Restraints Control Module Missing Message | A CAN communication error between the airbag ECU assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Comes on |
| U016487 | Lost Communication with HVAC Control Module Missing Message | A CAN communication error between the air conditioning amplifier assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Does not come on |
| U029387 | Lost Communication with Hybrid/EV Powertrain Control Module Missing Message | A CAN communication error between the skid control ECU assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Does not come on |
| U110787 | Lost Communication with Power Management Module Missing Message | A CAN communication error between the certification ECU (smart key ECU assembly) and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Does not come on | Master Warning Light: Comes on |
| U117087 | Lost Communication with Brake System Control Module (Secondary CAN Line) Missing Message | A CAN communication error between the skid control ECU assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Comes on | Master Warning Light: Comes on |
| U117587 | Lost Communication with Hybrid/EV Battery Energy Control Module "A" (Powertrain Bus) Missing Message | A CAN communication error between the battery ECU assembly and hybrid vehicle control ECU (CAN communication system malfunction) occurs (1 trip detection logic) | CAN communication system | Comes on | Master Warning Light: Comes on |
MONITOR DESCRIPTION
If the hybrid vehicle control ECU detects a problem with CAN communication with the ECU, it will illuminate the MIL and store a DTC.
MONITOR STRATEGY
| Related DTCs | U0100 (INF U010087): Lost communication with ECM/PCM verify communication U0110 (INF U011087): Lost communication with drive motor "A" control module verify communication U0129 (INF U012987): Lost communication with brake system control module verify communication U1170 (INF U117087): Lost communication with brake system control module verify communication U1175 (INF U117587): Lost communication with BECM verify communication |
| Required sensors/components | Main: Hybrid vehicle control ECU Sub: CAN bus line |
| Frequency of operation | Continuous |
| Duration | TMC's intellectual property |
| MIL operation | Immediately |
| Sequence of operation | None |
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not stored | TMC's intellectual property |
| Other conditions belong to TMC's intellectual property | - |
TYPICAL MALFUNCTION THRESHOLDS
| TMC's intellectual property | - |
COMPONENT OPERATING RANGE
| Hybrid vehicle control ECU | DTC U0100 (INF U010087) is not detected DTC U0110 (INF U011087) is not detected DTC U0129 (INF U012987) is not detected DTC U1170 (INF U117087) is not detected DTC U1175 (INF U117587) is not detected |
CONFIRMATION DRIVING PATTERN
HINT:
-
After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.
Click here
.gif)
-
When clearing the permanent DTCs, refer to the "CLEAR PERMANENT DTC" procedure.
Click here
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG) and turn the Techstream on.
- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
- Turn the power switch off and wait for 2 minutes or more.
- Turn the power switch on (IG) and turn the Techstream on.
-
Turn the power switch on (READY) and wait for 2 minutes or more. [*1]
HINT:
[*1] : Normal judgment procedure.
The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.
- Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.
-
Check the DTC judgment result.
HINT:
- If the judgment result shows NORMAL, the system is normal.
- If the judgment result shows ABNORMAL, the system has a malfunction.
- If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.
PROCEDURE
| 1. | CHECK DTC OUTPUT |
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Check for DTCs of all systems by following the prompts on the Techstream screen.
(d) Check for DTCs.
| Result | Proceed to |
|---|---|
| Hybrid vehicle control ECU outputs P253012. | A |
| Hybrid vehicle control ECU does not output P253012. | B |
(e) Turn the power switch off.
| A | .gif) | GO TO DTC CHART (P253012) |
| B | | GO TO CAN COMMUNICATION SYSTEM |
READ NEXT:
Lost Communication with Hybrid/EV Battery Energy Control Module "A" Missing Message (U011187)
DESCRIPTION The hybrid vehicle control ECU transmits and receives signals via CAN communication to and from the battery ECU assembly. DTC No. Detection Item DTC Detection Condition Trouble Ar
HVAC Control Module to Hybrid Powertrain Control Module Invalid Serial Data Received (U042481)
DESCRIPTION If the hybrid vehicle control ECU receives an invalid compressor control request from the air conditioning amplifier assembly via CAN communication, it will store this DTC. DTC No. De
Brake Override System
DESCRIPTION When the vehicle is being driven with the accelerator pedal depressed, depressing the brake pedal without releasing the accelerator pedal will activate the brake override system to restric
SEE MORE:
Generator High-voltage Circuit
DESCRIPTION The cause of this malfunction may be the generator high-voltage circuit. Check the generator internal resistance and the connection condition of the high-voltage line between the inverter and generator to check whether there is an open or short circuit. Related Parts Check Area Insp
Installation
INSTALLATION PROCEDURE 1. INSTALL STEERING WHEEL SWITCH HOUSING (a) When reusing the steering wheel switch housing: (1) Using pliers, expand the clamp and temporarily install the steering wheel switch housing as shown in the illustration. (2) While holding the clamp expanded, engage t
