Lexus ES manuals

Lexus ES: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK FOR DTC (MAIN BODY)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Trouble Codes

(e) Check for DTCs.

CHECK FOR DTC (AFS) (for LED Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.

Body Electrical > AFS > Trouble Codes

(e) Check for DTCs.

CHECK FOR DTC (AFS (SUB)) (for LED Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / AFS (Sub) / Trouble Codes.

Body Electrical > AFS (Sub) > Trouble Codes

(e) Check for DTCs.

CHECK FOR DTC (HL AUTOLEVELING) (for Bulb Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

Body Electrical > HL AutoLeveling > Trouble Codes

(e) Check for DTCs.

CHECK FOR DTC (HL AUTOLEVELING (SUB)) (for Bulb Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Trouble Codes.

Body Electrical > HL AutoLeveling (Sub) > Trouble Codes

(e) Check for DTCs.

CHECK FOR DTC (FRONT RECOGNITION CAMERA (FRONT LIGHTING CONTROL))

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes

(e) Check for DTCs.

CLEAR DTC (MAIN BODY)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Clear DTCs

(e) Clear the DTCs.

CLEAR DTC (AFS) (for LED Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / AFS / Trouble Codes.

Body Electrical > AFS > Clear DTCs

(e) Clear the DTCs.

CLEAR DTC (AFS (SUB)) (for LED Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / AFS (Sub) / Trouble Codes.

Body Electrical > AFS (Sub) > Clear DTCs

(e) Clear the DTCs.

CLEAR DTC (HL AUTOLEVELING) (for Bulb Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

Body Electrical > HL AutoLeveling > Clear DTCs

(e) Clear the DTCs.

CLEAR DTC (HL AUTOLEVELING (SUB)) (for Bulb Type Turn Signal Light)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Trouble Codes.

Body Electrical > HL AutoLeveling (Sub) > Clear DTCs

(e) Clear the DTCs.

CLEAR DTC (FRONT RECOGNITION CAMERA (FRONT LIGHTING CONTROL))

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs

(e) Clear the DTCs.

READ NEXT:

 Freeze Frame Data

FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever a lighting system DTC is stored, the headlight ECU sub-assembly and forward recognition camera stores the current vehicle state as freeze frame data. C

 Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a pa

 Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Lighting System DTC No. Detection Item DTC Output from Link B1244 Light Sensor Circuit Main Body B124B Automatic High Beam System Main Body

SEE MORE:

 Inspection

INSPECTION PROCEDURE 1. INSPECT ENGINE SWITCH (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 5 (SS1) - 6 (AGND) 1 (SS2) - 6 (AGND) Not pushed 10 kΩ or higher

 Reassembly

REASSEMBLY PROCEDURE 1. INSTALL STEERING LOCK ACTUATOR ASSEMBLY NOTICE: After replacing the steering lock actuator assembly, perform registration. (a) Secure the steering column assembly in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Temporarily install the steering lock

© 2016-2025 Copyright www.lexguide.net