Lexus ES: Accelerator Pedal Sensor
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Hybrid / Battery Control / Accelerator Pedal Sensor
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 ACCELERATOR PEDAL ASSEMBLY *2 ACCELERATOR PEDAL PAD *3 ACCELERATOR PEDAL SENSOR ASSEMBLY *4 NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Tighte
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the follow
Removal
REMOVAL PROCEDURE 1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 2. REMOVE ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY NOTICE:
Avoid physical shock to the accelerator pedal se
SEE MORE:
Crankshaft Position Sensor "A" (P033500,P033531)
DESCRIPTION If the crankshaft position signal pulse sent from the ECM via a direct line is abnormal, the motor generator control ECU (MG ECU) (built into the inverter with converter assembly) stores DTC P033500 or P033531. DTC No. Detection Item DTC Detection Condition Trouble Area MIL
System Voltage Circuit Short to Ground or Open (P056014)
MONITOR DESCRIPTION The auxiliary battery supplies electricity to the ECM even when the power switch is off. This power allows the ECM to store data such as DTC history, Freeze Frame Data and fuel trim values. If the auxiliary battery voltage falls below a minimum level, the memory is cleared and th
© 2016-2024 Copyright www.lexguide.net
