Lexus ES: Vehicle Control History
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / A25a-fxs (engine Control) / Sfi System / Vehicle Control History
VEHICLE CONTROL HISTORY
VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)
HINT:
A part of the control history can be confirmed using the vehicle control history.
Click here .gif)
VEHICLE CONTROL HISTORY (HYBRID CONTROL SYSTEM)
HINT:
A part of the control history can be confirmed using the vehicle control history.
-
for NICKEL METAL HYDRIDE BATTERY:
Click here
-
for LITHIUM-ION BATTERY:
Click here
READ NEXT:
Camshaft Position "A" Actuator Bank 1 General Electrical Failure (P001001)
DESCRIPTION The VVT-iE system adjusts the intake valve timing using a motor. Compared to conventional hydraulic VVT systems, the valve timing can be adjusted within a wider range and can be retarded m
Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 (P001100)
DESCRIPTION Refer to DTC P001001. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P001100 Camshaft Position "A" - Timing Over-Advanced or
Camshaft Position "A" - Timing Over-Retarded Bank 1 (P001200)
DESCRIPTION Refer to DTC P001001. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P001200 Camshaft Position "A" - Timing Over-Retarded Ban
SEE MORE:
Adjustment
ADJUSTMENT CAUTION / NOTICE / HINT *a Centering Bolt *b Standard Bolt HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
Centering bolts are used to install the door hinges to the vehicle body and door. The door cannot be adjus
Installation
INSTALLATION PROCEDURE 1. INSTALL VACUUM PUMP ASSEMBLY (a) When using a new vacuum pump assembly: (1) Apply engine oil to the No. 2 O-ring and No. 3 O-ring which are installed to a new vacuum pump assembly. *1 No. 2 O-ring *2 No. 3 O-ring Engine oil (b) When reusing the vacuum
© 2016-2024 Copyright www.lexguide.net
