Lexus ES: Using the driving support systems
Lexus ES (XZ10) Owner's Manual / Driving / Using the driving support systems
- Lexus Safety System + 2.0
- PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- RSA (Road Sign Assist)
- Dynamic radar cruise control with full-speed range
- BSM (Blind Spot Monitor)
- Driving Mode Select switch
- PKSA (Parking Support Alert)
- Intuitive parking assist
- RCTA (Rear Cross Traffic Alert) function
- RCD (Rear Camera Detection) function
- PKSB (Parking Support Brake)
- Parking Support Brake function (static objects)
- Parking Support Brake function (rear-crossing vehicles)
- Parking Support Brake function (rear pedestrians)
- Driving assist systems
READ NEXT:
Lexus Safety System + 2.0
The Lexus Safety System + 2.0 consists
of the following drive assist systems
and contributes to a safe and
comfortable driving experience:
Driving assist system
PCS (Pre-Collision System)
LT
PCS (Pre-Collision System)
The pre-collision system uses a
radar sensor and front camera to
detect objects in front of
the vehicle. When the system
determines that the possibility of a
frontal collision with an object is
LTA (Lane Tracing Assist)
When driving on highways and
freeways with white (yellow) lane
lines, this function alerts the driver
when the vehicle might depart from
its lane or course* and provides
assistance by operating t
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during luggage door opening cancel switch assembly removal/installation are shown below. Necessary Procedure A
Basic Inspection
CAUTION / NOTICE / HINT When a malfunction is not confirmed by the DTC check, troubleshooting should be carried out for all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following procedure, the location of the problem ca
© 2016-2024 Copyright www.lexguide.net
