Lexus ES: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
-
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
-
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Luggage Compartment Door Opener System
Symptom | Suspected Area | Link |
Luggage door opener does not operate | Proceed to "Luggage Compartment Door Opener does not Operate" | |
READ NEXT:
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junc
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a pa
DESCRIPTION The main body ECU (multiplex network body ECU) receives switch signals from the trunk and fuel switch assembly (luggage compartment door opening switch) the luggage door opening cancel swi
SEE MORE:
DISPOSAL PROCEDURE 1. DISPOSE OF SUSPENSION TOWER DAMPER (a) Using a hacksaw, cut the cylinder between (A) and (B) shown in the illustration to discharge the gas inside. *a 10 mm CAUTION:
Always use a cloth to prevent shards of metal from flying about due to the release of pressurized ga
INSTALLATION CAUTION / NOTICE / HINT NOTICE: Do not cross-thread the bolts when installing them. PROCEDURE 1. HOW TO PREVENT STATIC ELECTRICITY SST: 09890-47010 NOTICE:
Static electricity should be eliminated when removing/installing the inverter with converter assembly.
Do not touch the electr
© 2016-2024 Copyright www.lexguide.net