Lexus ES manuals

Lexus ES: Fail-safe Chart

Lexus ES (XZ10) Service Manual / Steering / Power Assist Systems / Power Steering System (for Hv Model) / Fail-safe Chart

FAIL-SAFE CHART

If a problem occurs in the power steering system, the power steering assist will be stopped or the amount of power assist will be decreased to protect the system.

Power Steering System

Malfunction

Fail-safe Operation

EPS warning light

Buzzer
  • Torque sensor (rack and pinion power steering gear assembly) malfunction
  • Power steering motor (rack and pinion power steering gear assembly) malfunction
  • Power steering ECU (rack and pinion power steering gear assembly) malfunction

Power steering assist stops or assist amount is limited

Red or yellow

Sounds intermittently or once
  • Vehicle speed signal malfunction
  • Skid control ECU (brake booster with master cylinder assembly) malfunction
  • Decrease in battery voltage (not malfunction)

Power steering assist is temporarily limited

Yellow

Sounds once

HINT:

  • If the power steering assist stops, the EPS warning light comes on (red).
  • If the amount of power assist is reduced, the EPS warning light comes on (yellow) and a vibration or sound may occur.
  • The amount of power assist may be decreased to prevent the motor and ECUs from overheating if the steering wheel is continuously turned when the vehicle is either stopped or driven at a low speed, or if the steering wheel is kept at either full lock position for a long time. In such cases, the amount of power assist returns to normal if the steering wheel is not turned for approximately 10 minutes with the power switch on (READY).
  • If the auxiliary battery is not sufficiently charged or the voltage decreases temporarily, the amount of power assist will be reduced and the EPS warning light will come on. In such cases, the amount of power assist returns to normal when the auxiliary battery voltage recovers.

READ NEXT:

 Freeze Frame Data

FREEZE FRAME DATA FREEZE FRAME DATA NOTICE: It is difficult to show the specified values (judgment values) clearly because freeze frame data values change significantly due to differences in measur

 Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th

 Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Power Steering System DTC No. Detection Item DTC Detection Condition Warning Indicate Return-to-normal Condition Note Link C1511 Torque Sensor1 Tor

SEE MORE:

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel main valve assembly removal/installation are shown below. Necessary Procedures After Parts Removed/

 Disassembly

DISASSEMBLY CAUTION / NOTICE / HINT NOTICE: This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. REMOVE SPARK PLUG Click here 2. REMOVE KNOCK CONTROL SENSOR Click here 3. REMOVE ENGINE

© 2016-2024 Copyright www.lexguide.net