Lexus ES: Diagnostic Trouble Code Chart
Lexus ES (XZ10) Service Manual / Engine & Hybrid System / Cruise Control / Road Sign Assist System (for Gasoline Model) / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Road Sign Assist System| DTC No. | Detection Item | Link |
|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | |
| U012987 | Lost Communication with Brake System Control Module Missing Message | |
| U014087 | Lost Communication with Body Control Module Missing Message | |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | |
.gif)
READ NEXT:
Vehicle Control History
VEHICLE CONTROL HISTORY NOTICE: Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again. CHECK VEHICLE CONTROL HISTORY (ROAD SI
Lost Communication with ECM/PCM "A" Missing Message (U010087,U012587,U012987,U014087,U015587)
DESCRIPTION When a malfunction is detected between various ECUs and sensors, these DTCs are stored. DTC No. Detection Item DTC Detection Condition Trouble Area U010087 Lost Communicatio
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Hybrid Control / Data List / Accelerator Position Sensor No.1 Voltage %, Acc
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front door opening trim weatherstrip removal/installation are shown below. Necessary Procedure After Par
© 2016-2024 Copyright www.lexguide.net
