Lexus ES: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Front Camera System| DTC No. | Detection Item | Link |
|---|---|---|
| C10001C | Control Module Internal Temperature Sensor "A" Circuit Circuit Voltage Out of Range | |
| C10051C | Control Module Internal Temperature Sensor "B" Circuit Circuit Voltage Out of Range | |
| C100A62 | Control Module Internal Temperature Sensor A/B Correlation Signal Compare Failure | |
| C1A7587 | Steering Vibrator System Missing Message | |
| C1A9346 | Main Microcomputer in Front Recognition Camera Calibration/Parameter Memory Failure | |
| C1A9445 | Image Processing Microcomputer in Front Recognition Camera Program Memory Failure | |
| C1A9447 | Image Processing Microcomputer in Front Recognition Camera Watchdog/Safety MCU Failure | |
| C1A9487 | Image Processing Microcomputer to Main Microcomputer in Front Recognition Camera Missing Message | |
| C1A9500 | Image Processing Module Malfunction in Front Recognition Camera | |
| C1A961C | Power Supply Circuit in Front Recognition Camera Circuit Voltage Out of Range | |
| C1AA800 | Front Recognition Camera Optical Axis Misalignment Malfunction | |
| C1AAE00 | Front Recognition Camera Heater Malfunction | |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | |
| U012987 | Lost Communication with Brake System Control Module Missing Message | |
| U014087 | Lost Communication with Body Control Module Missing Message | |
| U029387 | Lost Communication with Hybrid Powertrain Control Module Missing Message | |
| U030051 | Internal Control Module Software Incompatibility Not Programmed | |
| U030057 | Internal Control Module Software Incompatibility Invalid / Incompatible Software Component | |
| U032251 | Software Incompatibility with Body Control Module Not Programmed | |
| U032257 | Software Incompatibility with Body Control Module Invalid/Incompatible Software Component | |
.gif)
READ NEXT:
Vehicle Control History
VEHICLE CONTROL HISTORY NOTICE: Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again. CHECK VEHICLE CONTROL HISTORY (FRONT C
Control Module Internal Temperature Sensor "A" Circuit Circuit Voltage Out of Range (C10001C,...,C1A961C)
DESCRIPTION When an internal malfunction is detected in the forward recognition camera, these DTCs are stored. DTC No. Detection Item DTC Detection Condition Trouble Area C10001C Contro
Steering Vibrator System Missing Message (C1A7587)
DESCRIPTION The forward recognition camera communicates with the steering vibration ECU via LIN communication. If a communication error between the forward recognition camera and steering vibration EC
SEE MORE:
Adjustment
ADJUSTMENT PROCEDURE 1. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION HINT: The blind spot monitor beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using reflector. (a) When performing the blind spot monitor beam
Cellular Phone Inspection
PROCEDURE 1. CHECK USAGE CONDITION (a) Check that the vehicle and cellular phone meet the following conditions: NOTICE: If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
The cellular phone i
