Lexus ES manuals

Lexus ES: Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Telematics / Data List.

(e) According to the display on the Techstream, read the "Data List".

Body Electrical > Telematics > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

Min.: 0, Max.: 16777215

-

-

Total Distance Traveled - Unit

Total distance traveled unit

-, km or mile

-

-

IMEI

IMEI of telematics transceiver

15 digits

-

-

Software Version High

Software version of telematics transceiver(10 digits from left)

10 digits

-

-

Software Version Low

Software version of telematics transceiver(10 digits from right)

10 digits

-

-

MSISDN

MSISDN of telematics transceiver

16 digits

-

-

PLMN(MCC)

MCC of telematics transceiver

3 digits

-

-

PLMN(MNC)

MNC of telematics transceiver

3 digits

-

-

ICCID(High)

ICCID of telematics transceiver(10 digits from left)

10 digits

-

-

ICCID(Low)

ICCID of telematics transceiver(10 digits from right)

10 digits

-

-

Communication Status with TSC

Communication status with Service Center

Incomplete or Complete

Complete

-

Telematics Activation Status

DCM activation status

Shipping or Active

Shipping: Not activated

Active: Activated

-

Remote Vehicle Tracking

Display "Remote Vehicle Tracking" function enabled/disabled status

Not Avail or Available

NOT Avail: Following function disabled

Available: Following function enabled

-

Brand TOYOTA

Bland name

No or Yes

No: Except TOYOTA Brand

YES: TOYOTA Brand

-

OTA Reprogramming

Display "OTA Reprogramming" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

HELPNET Function

Display "Helpnet" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

Stolen Vehicle Tracking

Display "Stolen Vehicle Tracking" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

Helpnet Account Status

Display emergency call service account status

No Account, With Account or Other

-

-

Automatic Collision Notification Function

Display "Automatics Collision Notification" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

Manual Emergency Call Function

Display "Manual Emergency Call" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

Wireless Health Check Function

Display "Wireless Health Check" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

Stolen Vehicle Tracking Function

Display "Stolen Vehicle Tracking" function enabled/disabled status

Not Avail or Available

Not Avail: Following function disabled

Available: Following function enabled

-

Telematics Microphone Volume Adjust

Setting of Telematics Microphone Volume Adjust

Min.: 1, Max.:11

Displays customize setting of Telematics Microphone Volume Adjust

-

Telematics Speaker Volume Adjust

Setting of Telematics Speaker Volume Adjust

Min.: 1, Max.:14

Displays customize setting of Telematics Speaker Volume Adjust

-

Green Indicator

The green indicator light on the emergency call switch panel illumination status

Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness

-

-

Red Indicator

The red indicator light on the emergency call switch panel illumination status

Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness

-

-

Beep

Beep volume

Min.: 1, Max.:14

-

-

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Telematics / Active Test.

(e) According to the display on the Techstream, perform the Active Test.

Body Electrical > Telematics > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Green Indicator

Operate Manual (SOS) Switch Green Indicator

Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness

Operate with power switch on (IG) and the vehicle stopped.

Red Indicator

Operate Manual (SOS) Switch Red Indicator

Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness

Operate with power switch on (IG) and the vehicle stopped.

Beep

Beep volume

Min.: Vol01, Max.: Vol14

Operate with power switch on (IG) and the vehicle stopped.

READ NEXT:

 Dcm Activation

DCM ACTIVATION HINT: If the DCM (telematics transceiver) has been replaced, it is necessary to perform the Register Vehicle Information procedure. DCM ACTIVATION (a) Connect the Techstream to the DLC3

 Dcm Operation History

DCM OPERATION HISTORY DCM OPERATION HISTORY HINT: This function shows the telematics network status when the DCM (telematics transceiver) was operated. Use this when no DTC is present but this tele

 Diagnosis System

DIAGNOSIS SYSTEM DESCRIPTION (a) The DCM (telematics transceiver) control the vehicle safety connect system functions. Safety connect system data and Diagnostic Trouble Codes (DTCs) can be read throug

SEE MORE:

 Image from Camera for Parking Assist Monitor is Abnormal

DESCRIPTION The video signal from the rear television camera assembly is transmitted to the multi-display assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: If the cable was disconnected from and reconnected to the negative (-) auxiliary battery terminal, the estimated course lines may not

 Inspection

INSPECTION PROCEDURE 1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH (for TMC Made) *a Component without harness connected (Rear Combination Light Lens and Body LH) (a) Apply auxiliary battery voltage to the rear combination light lens and body LH and check that the lights illuminate. OK

© 2016-2024 Copyright www.lexguide.net