Lexus ES manuals

Lexus ES: Battery Blower

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 REAR UNDER COVER *2 REAR UNDER SIDE COVER LH *3 REAR UNDER SIDE COVER RH *4 REAR SEAT CUSHION LEG SUB-ASSEMBLY *5 REAR SEAT CUSHION ASSEMBLY *6

 Removal

REMOVAL PROCEDURE 1. REMOVE REAR SEAT CUSHION ASSEMBLY Click here 2. REMOVE REAR SEAT CUSHION LOCK HOOK Click here 3. REMOVE REAR DOOR SCUFF PLATE LH Click here 4. REMOVE REAR UNDER SIDE CO

 Installation

INSTALLATION PROCEDURE 1. INSTALL BATTERY COOLING BLOWER BRACKET (a) Install the battery cooling blower bracket to the battery cooling blower assembly with the 3 bolts. Torque: 7.5 N·m {76 kgf·cm,

SEE MORE:

 Internal Control Module Software Incompatibility Not Programmed (U030051)

DESCRIPTION If the forward recognition camera cannot verify the vehicle information sent from the hybrid vehicle control ECU, the forward recognition camera stores DTC U030051. DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from U030051 Internal Control

 Crankshaft Position Sensor "A" Signal Stuck in Range (P03352A,P033531)

DESCRIPTION Refer to DTC P033511. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P03352A Crankshaft Position Sensor "A" Signal Stuck in Range No crankshaft position sensor signal to the ECM while the engine running (1 trip detection lo

© 2016-2024 Copyright www.lexguide.net