Lexus ES manuals

Lexus ES: Air conditioning filter

The air conditioning filter must be changed regularly to maintain air conditioning efficiency.

Removing the air conditioning filter

1. Turn the power switch off.

2. Open the glove box.

3. Remove the panel.

Lexus ES. Do-it-yourself maintenance

4. Unlock the filter cover (A), pull the filter cover out of the claws (B), and remove the filter cover.

Lexus ES. Do-it-yourself maintenance

5. Remove the filter case.

Lexus ES. Do-it-yourself maintenance

6. Remove the air conditioning filter from the filter case and replace it with a new one.

The " UP" marks shown on the filter and the filter case should be pointing up.

Lexus ES. Do-it-yourself maintenance

■Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.

In dusty areas or areas with heavy traffic flow, early replacement may be required.

(For scheduled maintenance information, please refer to the "Owner's Manual Supplement" or "Scheduled Maintenance".)

■If air flow from the vents decreases dramatically The filter may be clogged. Check the filter and replace if necessary.

■Air conditioning filter with deodorizing function When fragrances are placed in your vehicle, the deodorizing effect may become significantly weakened in a short period.

When an air conditioning odor comes out continuously, replace the air conditioning filter.

NOTICE

■When using the air conditioning system

■To prevent damage to the filter cover When moving the filter cover in the direction of arrow to release the fitting, pay attention not to apply excessive force to the claws. Otherwise, the claws may be damaged.

Lexus ES. Do-it-yourself maintenance

READ NEXT:

 Cleaning the hybrid battery (traction battery) air intake vent and filter

To prevent the fuel economy from being affected, visually inspect the hybrid battery (traction battery) air intake vent periodically for dust and clogs. If it is dusty or clogged or if "Maintenan

 Electronic key battery

Replace the battery with a new one if it is depleted. ■If the electronic key battery is depleted The following symptoms may occur: The smart access system with push-button start and wireles

 Checking and replacing fuses

If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Checking and replacing fuses 1. Turn the power switch off.

SEE MORE:

 Installation

INSTALLATION PROCEDURE 1. SET NO. 1 CYLINDER TO TDC (COMPRESSION) (a) Confirm that the timing mark (cutout) on the crankshaft pulley is aligned with the "0" timing mark of the timing chain cover assembly. *a Timing Mark (Cutout) *b "0" Timing Mark 2. SET CAMSHAFT TIM

 Freeze Frame Data

FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever a DTC is detected, the windshield wiper motor assembly stores the current vehicle state as Freeze Frame Data. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the

© 2016-2024 Copyright www.lexguide.net