Lexus ES manuals

Lexus ES: Vehicle Information Unmatched (C168D)

DESCRIPTION

This DTC is stored if the rear television camera assembly judges as a result of its self check that the vehicle information received from the main body ECU (multiplex network body ECU) via CAN communication and the vehicle information stored in the rear television camera assembly do not match.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C168D

Vehicle Information Unmatched

Vehicle information is unmatched

  • Rear television camera assembly optical axis adjustment (back camera position setting)
  • Steering angle setting
  • Rear television camera assembly

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click here

PROCEDURE

1.

PERFORM CALIBRATION

(a) Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.

(1) Rear television camera assembly optical axis adjustment (back camera position setting).

Click here

(2) Steering angle setting.

Click here

NEXT

2.

CHECK DTC OUTPUT

(a) Clear the DTCs.

Chassis > Rear Camera > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.

Chassis > Rear Camera > Trouble Codes

HINT:

  • If DTC C168D is output, perform the procedure to register the vehicle information into the rear television camera assembly.
  • If DTC C168D is still output after performing the procedure to register the vehicle information into the rear television camera assembly 3 times, replace the rear television camera assembly.

Result

Proceed to

DTC C168D is output

A

DTC C168D is not output

B

A

REPLACE REAR TELEVISION CAMERA ASSEMBLY

B

END

READ NEXT:

 ECU Malfunction (C1611)

DESCRIPTION This DTC is stored if the rear television camera assembly judges that there is an internal malfunction as a result of its self check. HINT: The rear television camera assembly stores diffe

 Back Camera Power Supply Failure (C1621)

DESCRIPTION This DTC is stored if the rear television camera assembly judges as a result of its self check that the signals or signal lines between the rear television camera assembly and multi-displa

 Back Camera Disconnected (C1622)

DESCRIPTION This DTC is stored if the radio receiver assembly judges that the signals or signal lines between the rear television camera assembly and the multi-display assembly are not normal as a res

SEE MORE:

 Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here PROCEDURE 1. INSTALL ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING) (a) Install a new gasket to t

 Terminals Of Ecu

TERMINALS OF ECU CHECK VEHICLE APPROACHING SPEAKER CONTROLLER (a) Disconnect the G42 vehicle approaching speaker controller connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description Condition Sp

© 2016-2025 Copyright www.lexguide.net