Lexus ES: Remote Control System does not Operate
DESCRIPTION
The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof ECU (sliding roof drive gear assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear assembly) receives the signals and activates the sliding roof motor.
CAUTION / NOTICE / HINT
NOTICE:
- The panoramic moon roof key-linked function and panoramic moon roof wireless transmitter-linked function are operative when the power window customize settings "Door Key P/W Up", "Door Key P/W Down" and "P/W Down W/Transmit" are set to "ON" using the Techstream. (The default setting of each is "OFF".)
-
If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.
Click here
.gif)
-
The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
Click here
-
If a sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) DTC is output, perform troubleshooting for the DTC first.
Click here
-
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Click here
PROCEDURE
| 1. | CHECK REMOTE CONTROL FUNCTION |
(a) Check the key-linked and wireless transmitter-linked functions.
Click here
| Result | Proceed to |
|---|---|
| Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked functions. | A |
| The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all of the power windows operate. | B |
| Both the power windows and roof glass do not operate by the key-linked or wireless transmitter-linked function. | C |
| A | .gif) | USE SIMULATION METHOD TO CHECK |
| C | | GO TO POWER WINDOW CONTROL SYSTEM |
|
.gif)
| 2. | CHECK SLIDING ROOF OPERATION |
(a) Check the sliding roof operation.
Click here
OK:
Sliding roof operates normally.
| NG | | GO TO OTHER PROBLEM (Panoramic Moon Roof System does not Operate) |
|
| 3. | REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) |
(a) Replace the sliding roof ECU (sliding roof drive gear assembly).
Click here
|
| 4. | INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) |
(a) Initialize the sliding roof ECU (sliding roof drive gear assembly).
Click here
|
| 5. | CHECK REMOTE CONTROL FUNCTION |
(a) Check the key-linked and wireless transmitter-linked functions.
Click here
OK:
The key-linked and wireless transmitter-linked functions operate normally.
| OK | | END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE) |
| NG | | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
READ NEXT:
Key-off Operation Function Operates even if Operating Conditions are not Satisfied
DESCRIPTION According to the panoramic moon roof switch (map light sub-assembly) operation, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assemb
Panoramic Moon Roof System does not Operate
DESCRIPTION The sliding roof ECU (sliding roof drive gear assembly) and roof sunshade ECU (sliding roof drive gear assembly) receive each other's position information from the main body ECU (multiplex
SEE MORE:
Components
COMPONENTS ILLUSTRATION *1 CAM TIMING OIL CONTROL SOLENOID ASSEMBLY *2 NO. 1 ENGINE COVER SUB-ASSEMBLY *3 O-RING - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part ★ Precoated part - -
Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: After installing the luggage compartment door support assembly, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly. PROCEDURE 1. INSTALL LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY NOTICE:
Avoid touc
