Lexus ES manuals

Lexus ES: Precaution

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / A25a-fks (cooling) / Cooling Fan System / Precaution

PRECAUTION

INITIALIZATION

NOTICE:

Make sure to perform the necessary procedures (adjustment, calibration, initialization, or registration) after parts related to the cooling fan system have been removed/installed or replaced.

Click here

READ NEXT:

 Parts Location

PARTS LOCATION ILLUSTRATION *1 FAN WITH MOTOR ASSEMBLY - COOLING FAN MOTOR - COOLING FAN ECU *2 ECM *3 NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY - EFI-MAIN NO. 1

 System Diagram

SYSTEM DIAGRAM

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of

SEE MORE:

 Reassembly

REASSEMBLY CAUTION / NOTICE / HINT NOTICE: Steps 10 to 17 are temporary reassembly procedures for adjustment purposes. PROCEDURE 1. INSTALL STRAIGHT PIN (a) Using a plastic-faced hammer, install the 4 straight pins to the rear differential carrier sub-assembly. *a 8.0 to 9.0 mm (0.315 to 0.354

 Drive Motor "A" Temperature Sensor Voltage Out of Range (P0A2A1C,P0A2A1F)

DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs are stored when the motor temperature sensor output is abnormal. The cause of this malfunction may be one of the following: Motor temperature sensor malfunction Internal motor temperature sensor malfunction Open or short in motor temperature sensor

© 2016-2025 Copyright www.lexguide.net