Lexus ES: Oil Pump
READ NEXT:
COMPONENTS ILLUSTRATION *1 ENGINE BALANCER ASSEMBLY *2 ENGINE OIL LEVEL SENSOR *3 NO. 2 OIL PAN SUB-ASSEMBLY *4 OIL PUMP ASSEMBLY *5 OIL PUMP BRACKET *6 OIL STRAINER SUB-
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during oil
DISASSEMBLY PROCEDURE 1. REMOVE OIL PUMP RELIEF VALVE (a) Using a 27 mm socket wrench, remove the oil pump relief valve plug from the oil pump cover sub-assembly. *1 Oil Pump Relief
SEE MORE:
TERMINALS OF ECU CHECK VEHICLE APPROACHING SPEAKER CONTROLLER (a) Disconnect the G42 vehicle approaching speaker controller connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description Condition Sp
INITIALIZATION
PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO NEGATIVE (-) AUXILIARY
BATTERY TERMINAL (for HV Model)
Necessary Procedure
Effect/Inoperative Function when Necessary Procedure not Performed
Link
*: When performing learni
© 2016-2024 Copyright www.lexguide.net