Lexus ES manuals

Lexus ES: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

  • Use the following procedure to troubleshoot the window defogger system.
  • *: Use the Techstream.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

CUSTOMER PROBLEM ANALYSIS

HINT:

  • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
  • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
  • The following 5 items are important points for problem analysis:

    What

    Vehicle model, system name

    When

    Date, time, occurrence frequency

    Where

    Road conditions

    Under what conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem symptoms

NEXT

3.

PRE-CHECK

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

(d) Check the vehicle specifications.

NEXT

4.

PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO STEP 6

A

5.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) Terminals of ECU

Click here

(c) Data List / Active Test

Click here

(d) On-vehicle Inspection

NEXT

6.

REPAIR OR REPLACE

NEXT

7.

CONFIRMATION TEST

NEXT

END

READ NEXT:

 Operation Check

OPERATION CHECK CHECK WINDOW DEFOGGER SYSTEM (a) Turn the engine switch on (IG). (b) Check that the rear window defogger wire becomes warm by operating the rear window defogger switch of the air condi

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Inspect the fuses and relays related to this system before inspecting the suspected areas below. Use the table below to help determine the cause of problem symptoms.

 Terminals Of Ecu

TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY *A w/o Seat Heater *B w/ Seat Heater (a) Disconnect the G39 air conditioning amplifier assembly connector. (b) Measure the volta

SEE MORE:

 Removal

REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE HOOD SUPPORT ASSEMBLY NOTICE: Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure

 Camshaft Position Sensor

ComponentsCOMPONENTS ILLUSTRATION *1 NO. 1 ENGINE COVER SUB-ASSEMBLY *2 CAMSHAFT POSITION SENSOR (for Intake Side) *3 CAMSHAFT POSITION SENSOR (for Exhaust Side) - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part ★ Precoated part - - Rem

© 2016-2024 Copyright www.lexguide.net