Lexus ES manuals

Lexus ES: Glass Position Initialization Incomplete (B2313)

Lexus ES (XZ10) Service Manual / Vehicle Exterior / Window / Glass / Power Window Control System (for Hv Model) / Glass Position Initialization Incomplete (B2313)

DESCRIPTION

The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assemblies. The power window regulator motor assembly has motor, regulator and ECU functions.

When the ECU built into a power window regulator motor assembly determines that the power window regulator motor assembly has not been initialized, DTC B2313 is stored.

D-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for driver door) not initialized
  • Power window regulator motor assembly (for driver door) is malfunctioning
  • Auxiliary battery disconnected when power switch on (IG)
  • Power window regulator motor assembly (for driver door) not initialized
  • Power window regulator motor assembly (for driver door)
P-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for front passenger door) not initialized
  • Power window regulator motor assembly (for front passenger door) is malfunctioning
  • Auxiliary battery disconnected when power switch on (IG)
  • Power window regulator motor assembly (for front passenger door) not initialized
  • Power window regulator motor assembly (for front passenger door)
RL-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for rear LH door) not initialized
  • Power window regulator motor assembly (for rear LH door) is malfunctioning
  • Auxiliary battery disconnected when power switch on (IG)
  • Power window regulator motor assembly (for rear LH door) not initialized
  • Power window regulator motor assembly (for rear LH door)
RR-Door Motor

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B2313

Glass Position Initialization Incomplete
  • Power window regulator motor assembly (for rear RH door) not initialized
  • Power window regulator motor assembly (for rear RH door) is malfunctioning
  • Auxiliary battery disconnected when power switch on (IG)
  • Power window regulator motor assembly (for rear RH door) not initialized
  • Power window regulator motor assembly (for rear RH door)

CAUTION / NOTICE / HINT

NOTICE:

  • DTC B2313 is stored in each power window regulator motor assembly.
  • If the auxiliary battery is disconnected while the power switch is on (IG), DTC B2313 will be stored.
  • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.

    Click here

PROCEDURE

1.

PERFORM INITIALIZATION (APPLICABLE LOCATION)

(a) Turn the power switch on (IG).

(b) Initialize the power window regulator motor assembly.

Click here

HINT:

Initialize the power window regulator motor assembly that has DTC B2313 stored in its ECU.

NEXT

2.

CHECK DTC OUTPUT

(a) Turn the power switch off.

(b) Wait for at least 10 seconds, and then turn the power switch on (IG).

(c) Check for DTCs.

Body Electrical > D-Door Motor > Trouble Codes Body Electrical > P-Door Motor > Trouble Codes Body Electrical > RL-Door Motor > Trouble Codes Body Electrical > RR-Door Motor > Trouble Codes

HINT:

Check for DTCs for the power window regulator motor assembly that had DTC B2313 stored in its ECU.

OK:

DTC B2313 is not output.

Result

Proceed to

OK

A

NG (Driver door power window)

B

NG (Front passenger door power window)

NG (Rear LH door power window)

C

NG (Rear RH door power window)
A

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED)
B

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Door or Front Passenger Door)

C

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH Door or Rear RH Door)

READ NEXT:

 Driver Side Power Window does not Operate with Power Window Master Switch

DESCRIPTION When the power switch is on (IG), the power window regulator motor assembly (for driver door) is operated by the multiplex network master switch assembly. The power window regulator motor

 Remote Up / Down Function does not Operate

DESCRIPTION When the power switch on (IG), the multiplex network master switch assembly sends remote up and down signals to each power window regulator motor assembly via LIN communication. WIRING DIA

 Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch

DESCRIPTION When the power switch is on (IG), the power window regulator motor assembly (for front passenger door) is operated by the power window regulator switch assembly. The power window regulator

SEE MORE:

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspect

 Installation

INSTALLATION PROCEDURE 1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY NOTICE: If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one. (a) Engage the 2 guides. Bolt Screw (b) Tighten the 2 bolts and

© 2016-2024 Copyright www.lexguide.net