Lexus ES manuals

Lexus ES: Fuel Injector (for Direct Injection)

Lexus ES (XZ10) Service Manual / Engine & Hybrid System / A25a-fks (fuel) / Fuel Injector (for Direct Injection)

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 FUEL DELIVERY PIPE *2 FUEL INJECTOR SEAL *3 DIRECT FUEL INJECTOR ASSEMBLY *4 SENSOR WIRE *5 NO. 3 FUEL INJECTOR BACK-UP RING *6 O-RING *7

 Inspection

INSPECTION PROCEDURE 1. INSPECT DIRECT FUEL INJECTOR ASSEMBLY NOTICE: This inspection is for checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assembly

 Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts. Click here

SEE MORE:

 Removal

REMOVAL PROCEDURE 1. REMOVE FORWARD RECOGNITION CAMERA Click here 2. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY NOTICE: Do not touch the inner surface of the forward recognition with heater hood sub-assembly. Do not apply force to the heating element of the forward recognition

 Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front exhaust pipe assembly (TWC: Rear Catalyst), center exhaust pipe assembly and tail exhaust pipe ass

© 2016-2024 Copyright www.lexguide.net