Lexus ES: Freeze Frame Data
FREEZE FRAME DATA
FREEZE FRAME DATA
NOTICE:
- Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
- Turn the power switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the Techstream.
(a) Turn the power switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the power switch on (IG).
(d) Turn the Techstream on.
(e) Check the freeze frame data.
(f) Enter the following menus: Body Electrical / Tilt & Telescopic / Trouble Codes.
Body Electrical > Tilt&Telescopic > Trouble Codes Body Electrical > Tilt&Telescopic| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | Driving distance | Min.: 0 Max.: 999999 | - | - |
| Total Distance Traveled - Unit | Driving distance unit | km or mile | - | - |
| Tilt Up Limit | Uppermost tilt position | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | - |
| Tilt Down Limit | Lowermost tilt position | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | - |
| Telescopic Short Limit | Shortest telescopic position | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | - |
| Telescopic Long Limit | Longest telescopic position | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | - |
| Tilt&Telescopic Memory 1 (Driver1 Tilt&Telescopic Memory 1) | Tilt and telescopic memory position 1 | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | For Tilt&Telescopic Memory 1 |
| Tilt&Telescopic Memory 2 (Driver1 Tilt&Telescopic Memory 2) | Tilt and telescopic memory position 2 | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | For Tilt&Telescopic Memory 2 |
| Tilt&Telescopic Memory 3 (Driver1 Tilt&Telescopic Memory 3) | Tilt and telescopic memory position 3 | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | For Tilt&Telescopic Memory 3 |
| Driver Information Memory 1 (Driver1 Tilt&Telescopic Memory Last) | Driver Information Memory 1 | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | For Driver Information Memory 1 |
| Driver Information Memory 2 (Driver2 Tilt&Telescopic Memory 1) | Driver Information Memory 2 | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | For Driver Information Memory 2 |
| Driver Information Memory 3 (Driver2 Tilt&Telescopic Memory 2) | Driver Information Memory 3 | No Memory or Memory | No Memory: Position not memorized Memory: Position memorized | For Driver Information Memory 3 |
| Ignition Switch (CAN) | Communication state of power switch | OFF or ON | OFF: Communication interrupted ON: Communication normal | - |
| Handle Position | Steering wheel position signal | Away or Return | Away: Steering wheel in away position Return: Steering wheel in return position | - |
| Ignition Switch | Input state of power switch | OFF or ON | OFF: Input signal interrupted ON: Input signal normal | - |
| Tilt Manual Switch Up | Input state of tilt up switch | OFF or ON | - | - |
| Tilt Manual Switch Down | Input state of tilt down switch | OFF or ON | - | - |
| Telescopic Manual Switch Short | Input state of telescopic contract switch | OFF or ON | - | - |
| Telescopic Manual Switch Long | Input state of telescopic extend switch | OFF or ON | - | - |
| Tilt&Telescopic Manual Switch Voltage | Voltage data of tilt and telescopic switch | Min.: 0.000 V Max.: 4.998 V | Neutral position: Below 0.20 V Tilt up: 1.67 to 2.13 V Tilt down: 0.54 to 0.74 V Telescopic contract: 1.08 to 1.40 V Telescopic extend: 2.22 to 2.77 V | - |
| ECU Power Source Voltage | Voltage data of power supply | Min.: 0.000 V Max.: 19.992 V | 11.00 to 14.00 V | - |
| Tilt Position | Current tilt position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Telescopic Position | Current telescopic position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Tilt Return Memory Position | Memorized tilt return position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Telescopic Return Memory Position | Memorized telescopic return position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Tilt Up Limit Position | Uppermost tilt position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Tilt Down Limit Position | Lowermost tilt position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Telescopic Short Limit Position | Shortest telescopic position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Telescopic Long Limit Position | Longest telescopic position data | Min.: 0 Max.: 65535 | 28627 to 36864 | - |
| Tilt Memory Position 1 (Driver1 Tilt Memory Position 1) | Tilt data of memory position 1 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Tilt Memory Position 1 |
| Telescopic Memory Position 1 (Driver1 Telescopic Memory Position 1) | Telescopic data of memory position 1 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Telescopic Memory Position 1 |
| Tilt Memory Position 2 (Driver1 Tilt Memory Position 2) | Tilt data of memory position 2 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Tilt Memory Position 2 |
| Telescopic Memory Position 2 (Driver1 Telescopic Memory Position 2) | Telescopic data of memory position 2 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Telescopic Memory Position 2 |
| Tilt Memory Position 3 (Driver1 Tilt Memory Position 3) | Tilt data of memory position 3 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Tilt Memory Position 3 |
| Telescopic Memory Position 3 (Driver1 Telescopic Memory Position 3) | Telescopic data of memory position 3 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Telescopic Memory Position 3 |
| Vehicle Speed | Vehicle speed data | Min.: 0 km/h (0 mph) Max.: 255 km/h (158 mph) | Actual vehicle speed | - |
| Driver Tilt Memory Position 1 (Driver1 Tilt Memory Position Last) | Driver tilt memory position 1 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Driver Tilt Memory Position 1 |
| Driver Telescopic Memory Position 1 (Driver1 Telescopic Memory Position Last) | Driver telescopic memory position 1 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Driver Telescopic Memory Position 1 |
| Driver Tilt Memory Position 2 (Driver2 Tilt Memory Position 1) | Driver tilt memory position 2 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Driver Tilt Memory Position 2 |
| Driver Telescopic Memory Position 2 (Driver2 Telescopic Memory Position 1) | Driver telescopic memory position 2 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Driver Telescopic Memory Position 2 |
| Driver Tilt Memory Position 3 (Driver2 Tilt Memory Position 2) | Driver tilt memory position 3 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Driver Tilt Memory Position 3 |
| Driver Telescopic Memory Position 3 (Driver2 Telescopic Memory Position 2) | Driver telescopic memory position 3 | Min.: 0 Max.: 65535 | 28627 to 36864 | For Driver Telescopic Memory Position 3 |
| Tilt Motor Machine Lock Memory Data | Tilt Motor Machine Lock Memory Data | Not Exist or Existed | - | - |
| Telescopic Motor Machine Lock Memory Data | Telescopic Motor Machine Lock Memory Data | Not Exist or Existed | - | - |
| Autoaway/Return Operation Setting | Autoaway/Return Operation Setting | Tilt&Telescopic OFF, Telescopic ON, Tilt ON or Tilt&Telescopic ON | Tilt&Telescopic OFF: Tilt and telescopic operations prohibited Telescopic ON: Only telescopic operations permitted Tilt ON: Only tilt operations permitted Tilt&Telescopic ON: Tilt and telescopic operations permitted | - |
READ NEXT:
Fail-safe Chart
FAIL-SAFE CHART HINT: If the power source voltage to the multiplex tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it
Data List / Active Test
DATA LIST / ACTIVE TEST READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any part
Tilt and Telescopic Manual Switch Circuit Circuit Voltage Out of Range (B26031C)
DESCRIPTION Different voltage values are sent to the multiplex tilt and telescopic ECU by operating the tilt and telescopic switch. The multiplex tilt and telescopic ECU then judges which motor and in
SEE MORE:
Replacement
REPLACEMENT CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transfer case oil seal RH removal/installation are shown below. Necessary Procedures After Parts Rem
Components
COMPONENTS ILLUSTRATION *1 CAMSHAFT TIMING GEAR BOLT *2 O-RING *3 CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2) - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part Adhesive 1324 ★ Precoated part
