Lexus ES: EPB System Malfunction (C13AF)
Lexus ES (XZ10) Service Manual / Brake / Brake Control / Dynamic Control Systems / Electronically Controlled Brake System (for Hv Model) / EPB System Malfunction (C13AF)
DESCRIPTION
The skid control ECU (brake booster with master cylinder assembly) is connected to the parking brake ECU (brake actuator assembly) via CAN communication. If an electric parking brake system malfunction occurs, this DTC is output.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C13AF | EPB System Malfunction | 420 | Electric parking brake system malfunction signal continues for 1 second. | Parking brake ECU (brake actuator assembly) | Does not come on | Brake hold DTC HINT: EPB: Electric Parking Brake System |
PROCEDURE
| 1. | CHECK DTC (ELECTRIC PARKING BRAKE SYSTEM) |
(a) Check for electric parking brake system DTCs and record any codes that are output.
Chassis > Electric Parking Brake > Trouble Codes| NEXT | .gif) | INSPECT ELECTRIC PARKING BRAKE SYSTEM |
READ NEXT:
Reaction Force Pressure Sensor Power Supply Voltage Malfunction (C14B0,...,C14D4)
DESCRIPTION DTC No. Detection Item INF Code DTC Detection Condition Trouble Area MIL Note C14B0 Reaction Force Pressure Sensor Power Supply Voltage Malfunction 201 The supplie
Reaction Force Pressure Sensor Zero Point Malfunction (C14B3)
DESCRIPTION The reaction force pressure sensor detects and outputs the brake fluid pressure of the stroke simulator, which changes in accordance with brake pedal operation, to the skid control ECU (br
Stroke Sensor / Reaction Force Pressure Sensor Output Inconsistent (C14B6)
DESCRIPTION DTC No. Detection Item INF Code DTC Detection Condition Trouble Area MIL Note C14B6 Stroke Sensor / Reaction Force Pressure Sensor Output Inconsistent 209 The diff
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL OUTER MIRROR (a) w/o Blind Spot Monitor System: (1) Connect the connector. (2) Engage the claw. (3) Engage the clamp. (4) Connect th
Steering Angle Sensor Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Steering Angle Sensor Communication Stop Mode Any of the following conditions are met:
Communication stop for "Spiral cable (Steering Angle Sensor)" is indicated on the "Communication Bus Check" screen of the Techstream.
Click here
© 2016-2024 Copyright www.lexguide.net
