Lexus ES: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Grille Shutter System| DTC No. | Detection Item | Link |
|---|---|---|
| B1333 | Shutter Control State Maintenance Mode | |
| P059F73 | Active Grille Air Shutter "A" Actuator Stuck Closed | |
| P05A072 | Active Grille Air Shutter "A" Actuator Stuck Open | |
| P05A074 | Active Grille Air Shutter "A" Actuator Slipping | |
| P05A211 | Active Grille Air Shutter "A" Circuit Short to Ground | |
| P05A212 | Active Grille Air Shutter "A" Circuit Short to Battery | |
| P05A213 | Active Grille Air Shutter "A" Circuit Open | |
| P05A27E | Active Grille Air Shutter "A" Actuator Stuck On | |
| P05A27F | Active Grille Air Shutter "A" Actuator Stuck Off | |
| P05B112 | Active Grille Air Shutter "B" Circuit Short to Battery | |
| P05B114 | Active Grille Air Shutter "B" Circuit Short to Ground or Open | |
| P05B131 | Active Grille Air Shutter "B" No Signal | |
| U129387 | Lost Communication between Hybrid Powertrain Control Module and Active Grille Air Shutter Missing Message | |
.gif)
READ NEXT:
Shutter Control State Maintenance Mode (B1333)
DESCRIPTION This DTC is stored when the grille shutter system is changed to maintenance mode. DTC No. Detection Item DTC Detection Condition Trouble Area B1333 Shutter Control State Mai
Active Grille Air Shutter "A" Actuator Stuck Closed (P059F73,...,P05B131)
DESCRIPTION These DTCs are stored when a malfunction occurs in the grille shutter system. DTC No. Detection Item Note P059F73 Active Grille Air Shutter "A" Actuator Stuck Closed The ECM
Lost Communication between Hybrid Powertrain Control Module and Active Grille Air Shutter Missing Message (U129387)
DESCRIPTION This DTC is stored if a communication malfunction occurs between the hybrid vehicle control ECU and swing grille actuator assembly. DTC No. Detection Item DTC Detection Condition
SEE MORE:
Sound Quality is Bad Only when CD is Played (Volume is Too Low)
CAUTION / NOTICE / HINT NOTICE:
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
When replacing the radio receiver assembly, alw
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Start the engine. (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Circumference Monitoring Camera Control Module / Trouble Codes. (e) Check the details of the DTCs. Chassis > Circumference Monitoring Came
