Lexus ES: Components
COMPONENTS
ILLUSTRATION
| *1 | TIRE PRESSURE WARNING ECU AND RECEIVER | - | - |
.png) | N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
READ NEXT:
Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire
Installation
INSTALLATION PROCEDURE 1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER NOTICE:
Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
If the tire
SEE MORE:
Inspection
INSPECTION PROCEDURE 1. INSPECT REAR DOOR ILLUMINATION LIGHT LH (REAR DOOR OUTSIDE HANDLE ASSEMBLY LH) *a Component without harness connected (Rear Door Illumination Light LH (Rear Door Outside Handle Assembly LH)) (a) Connect 4 dry-cell batteries (1.5 V) in series. NOTICE: Do not use recha
Drive Motor "A" Phase V Current(High Resolution) Circuit Short to Battery (P0A6012,...,P0A631F)
DESCRIPTION The motor generator control ECU (MG ECU), which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if it detects a malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P0A6012
© 2016-2025 Copyright www.lexguide.net
