Lexus ES: Components
COMPONENTS
ILLUSTRATION
*1 | PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) | - | - |
READ NEXT:
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) CAUTION: To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from th
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during PCV
INSPECTION PROCEDURE 1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) (a) Install a hose to the PCV valve (ventilation valve sub-assembly). (b) Check the PCV valve (ventilation valve sub-assembly
SEE MORE:
INSTALLATION PROCEDURE 1. INSTALL ULTRASONIC SENSOR CUSHION SET HINT: Only perform this procedure when removing and installing the ultrasonic sensor cushion set. (a) Install the ultrasonic sensor cushion set as shown in the illustration. Install in this Direction - - 2. INSTALL FRONT C
CHECKING MONITOR STATUS The purpose of the monitor result (mode 06) is to allow access to the results of on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalysts and evaporative emissions (EVAP) systems. The monitor result allows
© 2016-2024 Copyright www.lexguide.net